Power Tool Saw Blade, 4-1/2" Dia, 36T, 0.063" Kerf, 3/8" Arbor, Tenryu PT-11536

Power Tool Series for Portable Saws and Table Saws PT-11536. 4-1/2" Dia., 36 Teeth, 3/8" Arbor, ATAF Grind, .063" Kerf, 15 Degree Rake. For clean and easy trim work on the Porter Cable trim saw.

Tenryu's power tool series saw blades feature fully hardened, expertly tensioned tool steel bodies that absorb impact, resist excess heat build-up, and stay flat. They are tipped with a high-grade, C-3, fine-grain tungsten carbide tip that resists erosion for extended blade life. Tenryu Power Tool Series blades have an aggressive Degree Rake angle for maximum cutting speed and efficiency. Each tip is precision honed on all four exposed surfaces to minimize micro-chipping along the cutting edge, resulting in a sharper, longer lasting edge.

Tenryu puts a great deal of care in manufacturing their saw blades to ensure every blade is of the highest quality. See our article on making Tenryu Saw blades.

The above item(s) are designed for use on the following TRIM SAW machines ONLY :

Model No. 314(Porter Cable)
Model No. PCE381K (Porter Cable)
Model No. DC571B(DeWALT)

WARNING : FOLLOW (OSHA) REGULATION 1910.243(a)(1)(i) DO NOT USE ANY OTHER SAW, SUCH AS A PNEUMATIC SAW, OR A DIE GRINDER
(OSHA) 1910.243(a)(1)(i)
All portable, power-driven circular saws having a blade diameter greater than 2 in. shall be equipped with guards above and below the base plate or shoe. The upper guard shall cover the saw to the depth of the teeth, except for the minimum arc required to permit the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the teeth, except for the minimum arc required to allow proper retraction and contact with the work. When the tool is withdrawn from the work, the lower guard shall automatically and instantly return to covering position.

WARNING: Cancer and Reproductive Harm—www.P65Warnings.ca.gov